The Hemlock Wraithfighter shares its plastic kit with the Crimson Hunter, so each box builds one or the other. That choice is made at assembly, which means the magnetization work on this model is about getting it onto a flight stand and base cleanly rather than swapping weapons.
Flight Stands
You can use either a posable or flat flight stand. The Extra Large Posable is the posable option — anything smaller does not have the pull to hold the model upright.
[Buy Product=warhammer-40k-extra-large-posable-flyer-stand,Variant=All]
To make the underside attach more cleanly, the Cross Pattern Convertor plugs into the cross hole under the model and gives a seated cup for the magnet. There is a different size for the Extra Large Posable and the Large Flat.
[Buy Product=cross-pattern-flyer-convertor-for-magnetic-flight-stands,Variant= 29074889572436]
If you prefer a flat stand, the Large Flat – Tall is the right pick.
[Buy Product=2x-large-flat-extra-strength-magnetic-flight-stands,variant=14030251360340]
[Buy Product=cross-pattern-flyer-convertor-for-magnetic-flight-stands,variant=all]
For the base, the Large Thick Flush-Fit Base Magnets (6mm x 2.6mm) are the right call. Use 1 if you transport the base separately and 2 if the model travels on the flight stand attached to the base.
[Buy Product=gw-flush-fit-base-magnets-large,variant=39439165882452]
If you want a base with magnet holes already preset so the magnets cannot pop out, use the 120mm oval base with magnet.
[Buy Product=bases-premagnetized-warhammer,variant=30427499921492]
For a peel-and-stick option, place 3 of the 25mm Peel & Stick Inner Base Magnets in a triangle inside the base — no drilling needed.
[Buy Product=flexible-self-adhesive-magnets,variant=51483453784354]
More Aeldari Siblings
Other Aeldari kits with magnetization guides on the blog:
- Crimson Hunter — the alternate build from this same kit
- Wave Serpent & Falcon
- Fire Prism & Night Spinner
- Wraithknight
- Shining Spears
- Windrider Jetbikes
- Guardians & Support Weapon