The Gyrfalcon Jetbike Sodality Magnetization Kit covers 2 Gyrfalcon Jetbikes from the Custodes Support Battle Group box, so 2 kits cover all 4 bikes in the box. Each bike can carry any of the Twin Corvae Las-Pulser, the Arachnus Volley Cannon, the Adrathic Devastator or the Lastrum Bolt Cannon. The rider's right arm comes off as well, so one set of bikes covers both loadouts and you never need to build a second set to change your list.
Gyrfalcon Jetbike Sodality N52 Magnetization Kit
Every weapon swap happens at the main weapon mount. A 5mm x 5mm x 2mm block magnet sits on the back end of the mount, and a 3mm x 2mm magnet goes into the rear connection point of each weapon. We recommend clipping the flat guide rails on both weapons so they slide on and off cleanly once the bike is finished.
At the rider, a 4mm x 2mm magnet goes in the right shoulder of the torso and a 3mm x 2mm magnet in the arm. Build that arm holding the Power Lance or gripping both handlebars. Because it is held by a magnet, you can change the lance angle on the table or pull the arm off for travel. An optional 8mm x 2mm magnet under the hull, where the peg mount used to be, lets the bike ride on a magnetic flight stand.
Our Gyrfalcon Jetbike Sodality magnetization guide covers the drill sizes and magnet polarity for each joint.
Gyrfalcon Jetbike Sodality Magnetization Kit x2
Regular price
Price
$12.99
Flight Stands for Gyrfalcon Jetbike Sodality
Each kit already includes the flight stand parts for its 2 bikes: 6mm Small Flat Acrylic stems, Small rock anchors, and a Small guide. For spare stands, or a complete set for another model, our Small Flat Magnetic Flight Stands come in the same Small Flat size. They are magnetized at the top and bottom, so the stand collapses flat and the bike stores separately.
Base Magnets for Gyrfalcon Jetbike Sodality
Each Gyrfalcon Jetbike ships on a 90mm x 52mm oval base, per the Games Workshop listing for the Custodes Support Battle Group. A magnet in that base holds the bike to a metal-lined case or magnetic tray between games.
Flush-Fit
We recommend the Large Thick 6mm x 2.6mm flush-fit magnet for this base. It is an N52 disc sized to sit flush inside a standard beveled base, so the bike stays level on the table.
Flush-Fit Base Magnets for Warhammer 40K, Age of Sigmar & The Old World
Large Thick 6mm x 2.6mm
Regular price
Price
$20.99
Peel & Stick
These flexible magnets have a foam adhesive backing and press into the underside of the base with no glue. We recommend two 25mm magnets per 90mm x 52mm oval. They suit decorative or textured bases, where a flush-fit disc may not sit level.
Peel & Stick Inner Base Magnets
25mm Round (33pcs)
Regular price
Price
$10.99
Bases with Magnets
This is a replacement 90mm x 52mm oval base with the magnet well already molded in. The matching disc magnets come loose in the pack and glue permanently into the well with super glue; plastic cement will not hold them. The oval comes in a 2-pack, so the 4 bikes from the box take two packs.
