The Pallas Grav-attack Custom Magnetization Kit lets one model carry both of its main weapon options, the Twin Iliastus Accelerator Fusil and the Twin Arachnus Blaze Cannons, and it converts the tank to a magnetic flight stand. Glued in place, the weapon choice is permanent; with magnets in the hull mounts and both weapons, you can change loadouts between games without building a second Pallas Grav-attack.
The flight stand conversion lets the model lift off its stand for transport and seat back on it at the table, so the stem and hull joint are not under strain in a case.
Pallas Grav-attack N52 Magnetization Kit
The kit covers the swap points that matter on this tank. Two 4mm x 4mm magnets go in the hull's lower weapon connection points, one left and one right. The Twin Iliastus Accelerator Fusil takes two 3mm x 2mm magnets, and the Twin Arachnus Blaze Cannons take two 4mm x 2mm magnets, so either weapon seats on the same hull mounts.
For the flight stand, one 8mm x 2mm magnet goes on the end of the clear 10mm x 17mm acrylic stem and one 10mm x 2mm magnet goes in the tank floor. The kit also includes a 3D printed rock for mounting the stem to the base. All magnets are N52 grade.
Our Pallas Grav-attack magnetization guide covers the drill sizes and magnet polarity for each joint.
Pallas Grav-attack Custom Magnetization Kit
Regular price
Price
$6.99 USD
Flight Stands for Pallas Grav-attack
The kit already includes the acrylic stem and the printed rock. If you want a spare or a complete stand set, we recommend the Short option of the 2 Sets Medium Flat Magnetic Flight Stands, which is 31mm assembled and sized for the Pallas Grav-attack.
Base Magnets for Pallas Grav-attack
The Pallas Grav-attack base size is a 105 x 70 mm oval, per the Games Workshop Chapter Approved Base Size Guide (June 2025). To hold the base in a magnetic transport case, we recommend the Large Thick 6 x 2.6 mm flush-fit base magnets.
Flush-Fit Base Magnets for Warhammer 40K, Age of Sigmar & The Old World
Large Thick 6mm x 2.6mm
Regular price
Price
$20.99 USD
For a no-drill option, we recommend peel and stick magnets: three 25 mm pieces cover a 105 x 70 mm oval base.
Peel & Stick Inner Base Magnets
25mm Round (33pcs)
Regular price
Price
$10.99 USD