The Space Marine Stormtalon Gunship and Stormhawk Interceptor share a single plastic kit, so a few well-placed magnets let one build swap between both flyers. Below are our recommendations for flight stands, base magnets, and basing options for the model.
Flight Stands
You can use either a posable or flat kit for the flight stand.
The Extra Large Posable is your posable option — anything smaller doesn't have the power to hold the model upright.
[Buy Product=warhammer-40k-extra-large-posable-flyer-stand,Variant=All]
You can use a Cross Pattern Convertor to make installing the magnet substantially easier.
[Buy Product=cross-pattern-flyer-convertor-for-magnetic-flight-stands,Variant=All]
Large Flat – Tall is your flat flight stand choice.
[Buy Product=2x-large-flat-extra-strength-magnetic-flight-stands,variant=14030251360340]
You can use a Cross Pattern Convertor to make installing the magnet substantially easier.
[Buy Product=cross-pattern-flyer-convertor-for-magnetic-flight-stands,Variant=29074511265876]
For a basing magnet, use the Large Thick Flush-Fit Base Magnets, 6mm x 2.6mm. Use 1 magnet if you transport the base separately and 2 if you transport the model on the flight stand on the base.
[Buy Product=gw-flush-fit-base-magnets-large,variant=39439165882452]
If you would like a base with holes preset for magnets so the magnets can never pop out, use the 120mm oval base with magnet.
[Buy Product=bases-premagnetized-warhammer,variant=30427499921492]
For a peel-and-stick basing option, use 3 of the 25mm Peel & Stick Inner Base Magnets spaced in a triangle inside the base — no drilling required.
[Buy Product=flexible-self-adhesive-magnets,variant=51483453784354]