Repulsor Magnetization Recommendations

Repulsor N52 Magnetization Kit

The Repulsor and Repulsor Executioner share a single plastic kit, so a properly planned magnetization lets one model swap between both profiles. The turret is the main decision point: the heavy onslaught gatling cannon and the heavy laser destroyer slot into the Repulsor frame, while the las-talon and macro plasma incinerator give you the Executioner pattern. Sponson hard points (storm bolters, fragstorm grenade launchers, the icarus rocket pod) and the underslung twin lascannon or las-talon are the other pieces worth pinning. Match magnet diameter to each weapon stem rather than running a single size across the kit, and keep polarity consistent so a left sponson can never end up where the right belongs.

The Repulsor sits on a Large Flat Extra Short Magnetic Flight Stand. Use the kit below for the stand connection so the hull lifts off cleanly for transport.

[Buy Product=gw-flight-stand-magnetizing-kit,Variant=All]

Optional alternatives if you would rather magnetize the base attachment instead of (or in addition to) the flight stand connection: the Repulsor's flight stand peg fits a Large Thick basing magnet, 6mm x 2.6mm. Use 1 for sheet-metal carry cases or 2 for flexible adhesive cases.

[Buy Product=gw-flush-fit-base-magnets-large,variant=39439165882452]

For a base with the magnet hole already drilled, drop in a pre-magnetized base so the Repulsor cannot pop loose mid-game.

[Buy Product=bases-premagnetized-warhammer,variant=30427499692116]

For a no-drill option, space three 25mm Peel & Stick Inner Base Magnets in a triangle inside the base.

[Buy Product=flexible-self-adhesive-magnets,variant=51483453784354]

More Adeptus Astartes Magnetization Recommendations

Back to blog

Buy More, Save More

Many of our kits have volume discounts, click through the product page for details on the bulk discounts for that product.