Impulsor / Gladiator N52 Magnetization Kit
The Impulsor and Gladiator share a single plastic kit, so one box builds either the Impulsor transport or any of the three Gladiator variants: Lancer, Reaper, or Valiant. The N52 magnetization kit below covers the full dual-build, letting you swap the Impulsor's open troop bay for the closed Gladiator hull and rotate between the Lancer (laser destroyer), Reaper (heavy onslaught gatling), and Valiant (las-talon) turret loadouts on the same chassis.
[Buy Product=impulsor-magnetizing-kit,Variant=All]
The Impulsor and Gladiator use the short stubby flight stand that came in with the newer hover-tank kits. We make a Large Flat Extra Short Magnetic Flight Stand sized specifically for that peg, so the hull lifts cleanly off the base for transport and storage.
[Buy Product=gw-flight-stand-magnetizing-kit,Variant=All]
Step-by-step build for all four loadouts:
For magnetizing the base itself, the Impulsor and Gladiator use Large Thick basing magnets (6mm x 2.6mm). One magnet works for strong sheet-metal cases; use two for flexible adhesive case materials.
[Buy Product=gw-flush-fit-base-magnets-large,variant=39439165882452]
If you prefer a base with the magnet hole pre-drilled so the magnet can't fall out, use the Bases with Magnets.
[Buy Product=bases-premagnetized-warhammer,variant=30427499692116]
For a peel-and-stick option with no drilling, the 60mm Peel & Stick Inner Base Magnets fit straight onto the underside of the base.
[Buy Product=flexible-self-adhesive-magnets,variant=51483453948194]