Winged Nazgûl Magnetization Recommendations

A variety of super glues for a variety of reasons. Here's a quick overview about the specific uses of each of our super glues.

 

Before getting to any one adhesive, we chose to carry this glue brand for a reason. It is the only one that can hold the strongest N52 Neodymium Super Magnets that we carry reliably. We could have gone with a number of different brands but this one worked better.

 

Maxi-Cure Plus Super Glue

This is a standard super glue with reasonable work and cure times. A little bit of gap filling goes a long way when magnetizing.

[Buy Product=maxicure-superglue,Variant=All]

Insta-Set Accelerant

Not an adhesive, this is a spray that cures the Maxi-Cure within a few seconds.

Not compatible with Super Gold, and Insta-Cure contains some Insta-Set already.

[Buy Product=instaset-instant-cure-superglue-spray,Variant=All]

Insta-Cure

This is a super quick cure time, it has some of the accelerant in the formula so it is a little looser but quick incredibly fast.

[Buy Product=insta-cure-1,Variant=All]

Super Gold

Colorless, odorless, and a little slower to cure, this CA glue is just as strong as the others but is the best for clear plastics and glass for a no-fog super glue. This is a premium glue and is a little slower to cure than the others. Not compatible with Insta-Set, it will heat up, still take a while to cure, and then fog. If you want fast acting go with the other glues we carry.

[Buy Product=super-gold-plus-acrylic-superglue,Variant=All]

Epoxy

This is a 2-part epoxy adhesive, best for when you have big magnets in big projects. Think 18mm magnets or larger.

[Buy Product=epoxy-5-minute-extra-strong,Variant=All]

Super Glue Caps

These are compatible with any of the 1/2oz, 1oz, or 2oz bottles but not the 8oz or Epoxy bottles of glue, not compatible with Insta-Set.

 [Buy Product=glue-caps-spare-superglue-caps,Variant=All]

Green Stuff

When you just need some time and a lot of material to fill a space where you want a magnet, mix up a pinch of the blue and yellow and show a magnet into it.

[Buy Product=green-stuff,Variant=All]

Good Magnet Gluing Practices:

If you are gluing a magnet into a hole there should be plenty of surface area to hold it in with glue.

If you are gluing a magnet to a smooth surface, very lightly sand or scuff the surface of the magnet and the gluing surface.

Try to keep finger oils to a minimum on the magnets and destination surfaces as these can reduce the effectiveness of adhesives.

Magnicators v2

[Buy Product=the-magnicator,Variant=All]

Large Pin Vise

[Buy Product=instaset-instant-cure-superglue-spray,Variant=All]

Needle Files

[Buy Product=needle-files-6pcs,Variant=All]

Calipers

[Buy Product=calipers,Variant=All]

Precision Dropper for Insta-Set

[Buy Product=insta-set-precision-dropper,Variant=All]

Drill Bit Small Bundle

[Buy Product=pinv-vice-with-5-drills,Variant=All]

Drill Bit Medium Bundle

[Buy Product=drill-bit-medium-4mm-6mm,Variant=All]

Drill Bit Large Bundle

[Buy Product=drill-bit-large-8mm-12mm,Variant=All]

Magnetization Starter Bundle

[Buy Product=super-gold-plus-acrylic-superglue,Variant=All]