Tesseract Vault & Obelisk Magnetization Kit

• Opens and closes the four pylons and outer walls to switch between the Obelisk and the Tesseract Vault.
• Lifts the Transcendent C'tan shard out of the cage and stands it on its own display rock.
• Removes the Wraith warden tail so the shard clears the cage cleanly.

• 18 of 5mm x 1mm N52 disc magnets for the core cables, pylon extensions, and the C'tan cage.
• 8 of 5mm x 2mm N52 disc magnets for the pylon branch sockets.
• 8 of 5mm x 1.5mm N52 disc magnets for the wall shelves.
• 3 of 6mm x 1mm N52 disc magnets for the C'tan feet, the display rock, and the cage floor.
• 1 custom 3D printed display rock.
• 1 pre-cut acrylic flight rod for the standalone C'tan display.

The Games Workshop Obelisk and Tesseract Vault plastic kit, which also builds the Transcendent C'tan. Sized for the current plastic kit, 10th edition Necrons.

Difficulty 4 of 5. Drilling required with 3mm and 5mm bits in a large pin vise. This is one of the largest plastic kits in the game, so plan an evening for it.

Tips

• Keep all eight wall corner halves separate until each shelf magnet is set. Building the walls first makes the drilling harder.
• Save a few of the kit's scarabs to cap any hole you drill through, then seat the magnet flush against the scarab.
• Run a flat needle file across the C'tan feet and both ends of the acrylic rod so the glue grabs.

Full step by step photos are in the install guide.