The Razorwing Jetfighter and Voidraven Bomber are built from the same plastic kit, with the loadout determining which flyer you end up with. The Voidraven swaps in twin void mines on the underwing pylons (where the Razorwing carries its missile rack) and trades the Razorwing's twin lances for a pair of void lances at the nose. Magnetizing the wing pylons and the nose weapon block lets you field either profile from one model โ useful since both share the same flying base footprint and transport needs.
Flight Stands
You can use either a posable or flat kit for the flight stand on your Razorwing or Voidraven.
The Extra Large Posable is your posable option โ anything smaller doesn't have the holding power to keep the model upright.
1 Set Extra Large Posable Magnetic Flight Stand
Regular price
Price
$19.99
To convert the bottom of the model so the magnet attaches more easily, use a Cross Pattern Convertor. It plugs into the cross hole under the hull and provides a clean cup for the magnet to seat into. There is a different size for the Extra Large Posable and the Large Flat.
Cross Pattern Flyer Convertor for Magnetic Flight Stands
Regular price
Price
$9.99
Large Flat โ Tall is your flat flight stand choice.
Cross Pattern Flyer Convertor for Magnetic Flight Stands
Regular price
Price
$9.99
For a basing magnet, use the Large Thick Flush-Fit Base Magnets, 6mm x 2.6mm. Use 1 magnet if you transport the base separately, and 2 if you transport the model on the flight stand on the base.
Flush-Fit Base Magnets for Warhammer 40K, Age of Sigmar & The Old World
Large Thick 6mm x 2.6mm
Regular price
Price
$20.99
If you would like a base with holes preset for magnets so they can never pop out, use the 120mm oval base with magnet.
For a peel-and-stick basing option, use 3 of the 25mm Peel & Stick Inner Base Magnets spaced in a triangle inside the base โ no drilling required.
Peel & Stick Inner Base Magnets
25mm Round (33pcs)
Regular price
Price
$10.99