Base Magnets for Halo Flashpoint
Halo Flashpoint is a skirmish game where Spartans, ODSTs, and other UNSC and Banished operatives fight across compact battlefields. Most operatives sit on 30mm round bases, with a few larger figures on bigger plates. Sizing your base magnets to those plates keeps every model locked to a magnetic miniature case during transport without drilling, glue, or permanent changes to the model.
Use the chart below to match magnet diameter to your operative's base. The 32mm Peel & Stick magnet is the closest fit for standard 30mm Halo Flashpoint infantry; 25mm works as a slightly inset alternative if you prefer a magnet that sits fully inside the base footprint.
25mm — Inset fit for 30mm operative bases; standard infantry on 25mm plates
[Buy Product=flexible-self-adhesive-magnets,variant=51483453784354]
32mm — Recommended for 30mm Halo Flashpoint operative bases (Spartans, ODSTs, Elites, Brutes)
[Buy Product=flexible-self-adhesive-magnets,variant=51483453849890]
40mm — Larger figures and heavier operatives on oversized plates
[Buy Product=flexible-self-adhesive-magnets,variant=51483453882658]
If you prefer drill-and-glue over peel-and-stick, disc magnets press cleanly into the underside of Halo Flashpoint bases and pair with a steel-lined transport case.
6mm x 1mm disc magnets — for standard operatives on 30mm or smaller bases.
[Buy Product=50pcs-1-4-x-1-32-rare-earth-disc-magnets,Variant=All]
8mm x 1mm disc magnets — for larger figures and any oversized bases in your warband.
[Buy Product=50pcs-8mm-x-1mm-rare-earth-disc-magnets,Variant=All]
Quick sizing reference
- 30mm operative bases: 32mm Peel & Stick (closest match) or 25mm (inset). Drill option: 6mm x 1mm disc.
- 25mm bases: 25mm Peel & Stick. Drill option: 6mm x 1mm disc.
- 40mm bases: 40mm Peel & Stick. Drill option: 8mm x 1mm disc.
- Larger plates: 40mm Peel & Stick or multiple 8mm discs spaced under the base.
How to apply Peel & Stick magnets
Wipe the underside of the base with a dry cloth or a touch of isopropyl alcohol. Peel the backing, press the magnet firmly onto the base, and hold for a few seconds. Let the adhesive cure for 24 hours before loading the operative into a transport case for full holding strength.
More Magnetization Recommendations
- Base Magnetization Ultimate Guide — Full reference on base sizes, magnet diameters, and transport setups across miniature systems.