The Grey Knights Nemesis Dreadknight is a single dreadnought-equivalent walker, and its arm hardpoints carry the entire weapon profile. Magnetizing the shoulders lets one model run the full ranged and melee loadout without committing to a single build at assembly. The recommendations below cover the kit, the 80mm base for transport, and related Adeptus Astartes guides.
[Buy Product=nemesis-dreadknight-magnetization-kit,Variant=All]
Nemesis Dreadknight Magnetization Kit
The Nemesis Dreadknight kit gives you an oversized walker with paired arm hardpoints and a Grandmaster torso option, so the magnets need to handle every arm swap on both sides. With the kit installed, each shoulder accepts the dreadfist with heavy psycannon, the gatling psilencer, the heavy incinerator, the nemesis greatsword, and the daemon hammer. That means a single assembled model can switch between a shooting profile, a close-combat profile, or a mixed loadout between games. The kit also covers the Grandmaster swap so the same chassis runs as a standard Nemesis Dreadknight or Grand Master in Nemesis Dreadknight Armour.
[Buy Product=nemesis-dreadknight-magnetization-kit,Variant=All]
Base Magnets
The Nemesis Dreadknight stands on an 80mm round base. To secure the model to a steel-lined magnetic miniature case for transport, use one Large Thick Flush-Fit 6mm x 2.6mm Base Magnet if you carry the model off the base, or two if you carry it on the base.
[Buy Product=gw-flush-fit-base-magnets-large,variant=39439165882452]
If you prefer a base with preset holes for magnets, the 120mm oval pre-magnetized base works as an alternative footprint for diorama or display use.
[Buy Product=bases-premagnetized-warhammer,variant=30427499921492]
For a peel-and-stick option that skips drilling, place three 25mm Peel & Stick Inner Base Magnets in a triangle inside the 80mm base.
[Buy Product=flexible-self-adhesive-magnets,variant=51483453784354]